Wire Rod Coil Shot Blasting Machine

Diameter of the wire: Φ 4～Φ 40mm

Inner diameter of coil: Φ 800-1100mm

Outer diameter of coil: Φ1200-1400mm

Maximum load capacity mandrel :2700kg

Wire rod coil handing type: cantilever mandrel loading ( One cantilever mandrel inside the blasting chamber will clockwise rotate 15s and then counterclockwise 15s which controled by PLC during blast descaling, the rotation time for each direction is adjustable. while the other Outdoor cantilever mandrel is loading and unloading )

Productivity: 7-15min/time

Effective length of mandrel:3800mm-5500mm(can be customized)

Rotation speed: 10-20 r/min ( frequency control )

The technical data is not binding and may be subject to change.

Depending on the type of parts, production method, etc., further machine types and measurement specification sheets upon request.

The Wire Rod Coil Decaling Machine is special designed for blast cleaning wire rod coils. It uses the blasting process to remove the rust, heat scale and Corrosion from the surface of the wire rod coil. The surface derust grade can reach to Sa2.5 and roughness grade can reach to Ra6.3μm to Ra12.5μm after shot blasting process. Compared with the pickling treatment method, it has the features of economy, environment-friendly and high efficiency.

Applications of Wire Rod Coil Shot Blasting Machine

1.Surface preparation for coil wire rod:

2.Rust and Heat Scale removal

3.Corrosion removal

4.Cleaning

The Wire Rod Coil Decaling Machine is special designed for blast cleaning wire rod coils. It uses the blasting process to remove the rust, heat scale and Corrosion from the surface of the wire rod coil. The surface derust grade can reach to Sa2.5 and roughness grade can reach to Ra6.3μm to Ra12.5μm after shot blasting process. Compared with the pickling treatment method, it has the features of economy, environment-friendly and high efficiency.

This machine adopt the unique "revolving door + 3.8 meters double cantilever mandrels"to load the wire rod in coils, it implement dual-station working mode, and greatly increase the production capacity of the equipment.

Cantilever mandrel is made by special alloy steel, the action of the mandrel of "up and down + swing around + clockwise and anticlockwise rotation" are perfectly combined to reach to the throughly blast cleaning effect during the shot blasting process. Due to the reasonable blast wheel arrangement and the above mentioned, the inner and outer surfaces of the wire rod coil can be effectively blasted cleaning by blasting media. The whole machine system is controlled by PLC which can easily and reliably operate.